Search results
Sigma Fusible Plugs are commonly known as Temperature Safety Elements (TSE) within the safety system industry. All Fusible Plugs have a core of fusible material that melts due to intense heat of a fire or other heat source.
Temperature The TSE control device is pre-set to a trip temperature of 50 ºC prior to leaving our factory. In order to achieve the shortest trip time after a dry-run and thus the max. protection of the pump stator, the trip temperature at the TSE control device has to be set as low as possible. For the initial commissioning the temperature ...
The TSM/TSE series consists of simple electrical equipment. In the case of intrinsically safe connections as per EN 60079-14, the TSM/TSE can be used in Zone 1 (group IIC, device category 2G) explosive areas; this also applies to the inner zone of the tank. The temperature switches are classified as temperature class T4.
• Temperature display range 0 - 99°C (“-5” when below -5°C “EA” when above 99°C). • Temperature setting ranges 30 - 65°C. • Heat failure - when increase at a rate of 4°C or less per hour.
the case of intrinsically safe connections as per EN 60079-14, the TSM/TSE can be used in Zone 1 (group IIC, device category 2G) explosive areas; this also applies to the inner zone of the tank. The temperature switches are classified as temperature class T4. These temperature switches are designed in a manner, which
FEATURES. Combined control and safety function. Patented MFS technology or traditional bimetal for independent non self resetting safety option. Direct plug-in to heating element to reduce wiring and mounting costs.
• Temperature Display - Displays temperature in degrees Celsius. • Mode Select Switch - Used to select Run, Set Temperature, Set High Alarm, Set Low Alarm, Calibrate, Backup.
