Search results
Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate-fpv-shopping-listSUPPORT ME ON PATREON at: http:...
18 lut 2022 · There seems to be some noise on those gimbals. They are not supposed to be so sensitive. This is not a calibration issue but something physical with the hardware.
13 sty 2021 · I have weird issue on my Tango 2. When I power up and do the calibration (including crosses) it works perfectly. When I put my gimbal stick to extremes and move second axis the first one is rock solid on the given extreme.
A quick procedure on how to calibrate the TBS Tango 2 Gimbals. Check the linked video for the NEW Pyrodrone CNC Gimbals full upgrade tutorial.
28 wrz 2023 · If the warning disappears when moving the stick to the bottom corner that sounds like a calibration issue so i would try recalibrating the sticks. You could also have a problem with the gimbals, or there might be some foreign debris interfering with the hall sensors on the main board.
The solution was to calibrate the gimbals (page 5 of tools menu). Another issue was that the input page didn’t have Aileron channel available. After gimbal calibration, I wiggled the roll and the aileron channel appeared.
I don’t own the tango 2 but based on your info of the pitch and roll not showing up, it seems like something may be wrong with the right side gimbal. Again I cannot say with certainty but I’d perhaps check the insides and make sure everything is wired up and connected.
