Search results
1. Open your browser, enter the IP address of the router, tendawifi.com, and then press the Enter key. 2. Enter the administrator username and password to log in to the router backend management interface. 3. Find the WiFi settings option in the settings and find the WiFi Name&Password modification option in it. 4.
Tenda 1. Podłącz kabel internetowy do jednego z portów LAN w routerze oraz do swojego komputera ze złączem na kabel internetowy 2. Wejdź na przeglądarkę internetową (tutaj Opera) i wpisz w pasku adres routera, który znajdziesz na naklejce od dołu routera (najczęściej jest to 192.168.0.1) 3. Kliknij pomiń
Wait for 30 seconds, and connect with your router by connecting to the new SSID and password you set before. NOTE: If you forget your password you just set before, you can reset the router into factory setting and configure your password again.
Enter the user name and password to access the resources on the FTP server. After the configurations, if internet users still cannot access the FTP server, try the following methods: Ensure that the LAN port number configured in the port forwarding function is the same as the service port number set on the server.
You can change the Wi-Fi name and password to whatever you want. Part 1: Connect the devices together. Part 2: Log into the Tenda web-based setup page. Part 3: Find out or change the Wi-Fi name. Part 4: Find out or change the password. Connect the devices together.
When you use the router for the first time, no password is required to log in to the web UI of the router and you can set a login password on this page. If you have already set a login password, you can change the password on this page and the old password is required.
Connect your smart phone to the WiFi network of the router using the WiFi name and password labeled on the bottom of the router. Step 2 Set up the router. 1. Start a web browser on the phone that has connected to the router, and visit tendawifi.com.
