Search results
Bosch Rexroth Oil Control S.p.A. PILOT OPERATED CHECK VALVES. They are non-modulating valves which allow free flow through the check valve into the actuator (V2 to C2) and then block the reverse flow until they feel a pilot pressure directly proportional to the load in the pilot line, so that the pilot piston can push the check poppet off its seat.
- Check valve, pilot operated
The isolator valve type Z2S is a releasable check valve in...
- Pilot operated check, dual
flow is possible only when sufficient pilot pressure is...
- Check valve, pilot operated
The isolator valve type Z2S is a releasable check valve in sandwich plate design. It is used for the leakage-free blocking of one or two actuator ports, even for long standstill times. In direction A1 to A2 or B1 to B2, there is a free flow; in the opposite direction, the flow is blocked.
The isolator valve type Z2S is a releasable check valve in sandwich plate design. It is used for the leakage-free blocking of one or two actuator ports, also in case of longer standstill times. In direction A1 to A2 or B1 to B2, there is a free flow; in the opposite direction, the flow is blocked.
4/12 Z2S Check valve Bosch Rexroth AG, RE 21553, Edition 2015-11 Function, sections, circuit example The isolator valve type Z2S is a releasable check valve in sandwich plate design. It is used for the leakage-free blocking of one or two actua-tor ports, also in case of longer standstill times.
Check valve | SV; SL 5/18 RE 21468, edition: 2018-06, Bosch Rexroth AG Function, section The isolator valve type SV/SL is a pilot operated check valve for subplate mounting or threaded connection. It is used for the leakage-free blocking of one actuator port, also in case of longer standstill times. The valve basically consists of a housing (1 ...
flow is possible only when sufficient pilot pressure is applied at V2 or V1, which act as cross connected pilot ports, and the pilot piston lifts the poppet from its seat overcoming cylinder port pressure. In case of valve application in redundancy systems it is especially recommended to use version with sealed pilot piston.
The isolator valve type Z2S is a releasable check valve in sandwich plate design. It is used for the leakage-free blocking of one or two actua-tor ports, even for long standstill times. In direction A1 to A2 or B1 to B2, there is a free flow; in the opposite direction, the flow is blocked.
