Search results
The new aluminium tuned pipe gives you massive acceleration and top speed, plus the new high-flow air filter will extend engine life by keeping out more dust and dirt! Long suspension arms and shocks on both front (above) and rear (below).
5 kwi 2024 · Settle in for this one - it's over an hour, and has great production value (and is hilarious!) But if you want to know how a carb works, how the needle valves work, how to adjust your idle, or anything else involved with nitro tuning, you must check this out.
21 sie 2019 · With HPI, the first step is to tune your GRP engine. Next, break in your new RC car, with the engine installed in it. Using a heat gun, heat the engine to a temperature of 160 to 180 degrees, before breaking it in. With the glow plug starter connected, you can start the engine, in a rich condition.
13 maj 2009 · Before you even place your nitro car on a starter box or yank its pull-starter, read the instruction manual that came with your engine or car kit. Most nitro kits’ manuals have a section that will tell you approximately where the carburetor’s needle settings should be for initial start up.
Standard burn room - Guarantees easy adjustment of the engine in all conditions; Extra reinforced con rod - Specially adjusted for .32 engines; XTEC T6 engine housing - Especially reinforced heavy duty engine housing for toughest offroad action
Tuning a nitro engine for best performance can be a bit complex, but with patience and practice, you can achieve optimal results. Here's a general step-by-step guide to help you tune a nitro RC car engine:
Race Prep Service by EBMods™. To set the carburetor and confirm proper engine performance. If you're wanting your engine Ready to Race out of the box, this is the service for you. Get your RC Nitro Engine Broke-In and Dyno Tuned by one of the best in the business.
