Search results
the quick-release lever to unlock the T-bar. Note: The joint release lever is spring-loaded and will automatically lock in the upright position when fully upright. Note: The tension of the quick-release lever can be adjusted by manually tightening or loosening the Allen bolt. Be careful not to over-tighten. You should always be able
When the T-bar is raised to the maximum height, depress the push button located directly below the quick-release lever to unlock the T-bar. Note : The tension of the quick-release lever can be adjusted by manually tightening or loosening the Allen bolt.
1 The tension of the quick-release lever can be adjusted by manually tightening or loosening the Allen bolt. Be careful not to over-tighten. You should always be able to open and close the quick-release lever by hand and the T-bar should slide freely when the quick-release is open. 4
To adjust the height of the handlebars, open the quick-release lever and slide the T-bar to the desired position and resecure the quick-release lever to lock into place. The tension of the quick-release lever can be adjusted by manually tightening or loosening the Allen bolt.
Note: The tension of the quick-release lever can be adjusted by tightening or loosening the allen bolt. Be careful not to over-tighten. You should always be able to open and close the quick-release lever by hand and the T-tube should slide freely with the quick-release open. q Unfolding the scooter for first time use. 3 WARNINg: Failure to
quick release lever to lock into place. If the T-bar is raised to the maximum height, depress the spring loaded button located directly below the quick release lever to lower the T-bar. Note: The tension of the quick-release lever can be adjusted by tightening or loosening the Allen bolt. Be careful not to over-tighten.
The tension of the quick-release lever can be adjusted by manually tightening or loosening the Allen bolt. Be careful not to over-tighten. You should always be able to open and close the quick-release lever by hand and the T-bar should slide freely when the quick-release is open.
