Search results
Use only nVent-approved glass tape or cable ties to secure the cable to the pipe. Damaged heating cable or components must be repaired or replaced. Contact nVent for assistance. Use only fire-resistant insulation which is compatible with the application and the maximum exposure temperature of the system to be traced.
• Do not attempt to repair or energize damaged cable. Remove damaged cable at once and replace with a new length using the appropriate nVent RAYCHEM splice kit.
The Installation and Maintenance manual is for nVent RAYCHEM self-regulating and power limiting heating cable systems on thermally insulated pipes and vessels only. For information regarding other applications contact your nVent representative. BTV & XTV Self Regulating Heating Cables.
Do not attempt to repair or energize damaged cable. Remove damaged cable at once and replace with a new length using the appropriate Raychem splice kit. Replace damaged components. Re-use of the grommets, or use of the wrong grommet, can cause leaks, cracked components, shock, or fire.
This installation and maintenance manual is for nVent RAYCHEM Self-Regulating and Power-Limiting heat-tracing systems on thermally insulated pipes and vessels only. This includes nVent RAYCHEM BTV, HBTV, QTVR, HQTV, XTV, HXTV, KTV, VPL heating cables and the appropriate RAYCHEM components.
Page 1: Installation Instructions. WinterGard Splice and Tee Kit with End Seal Installation Instructions Description The WinterGard H910 Splice and Tee Kit is for use with WinterGard self-regulating heating cables to make splice, tee, and end seal connections.
Brass joints and end caps are used to repair or modify heating cables with a copper sheath heated section and copper sheath cold lead section and are suitable for exposure temperatures up to 392°F (200°C). Stainless steel joints and end caps are used to repair or modify heating cables with an Alloy 825 sheath
