Search results
• Do not attempt to repair or energize damaged cable. Remove damaged cable at once and replace with a new length using the appropriate nVent RAYCHEM splice kit.
• Damaged heating cable can cause electrical arcing or fire. Use only nVent-approved glass tape or cable ties to secure the cable to the pipe. • Damaged heating cable or components must be repaired or replaced. Contact nVent for assistance. • Use only fire-resistant insulation which is compatible with the application and the maximum exposure
The Installation and Maintenance manual is for nVent RAYCHEM self-regulating and power limiting heating cable systems on thermally insulated pipes and vessels only. For information regarding other applications contact your nVent representative. BTV & XTV Self Regulating Heating Cables.
Use of the Manual. This installation and maintenance manual is for Raychem Self-Regulating and Power-Limiting heat-tracing systems on thermally insulated pipes and vessels only. This includes Raychem BTV, QTVR, XTV, and VPL heating cables and the appropriate Raychem components.
Do not attempt to repair or energize damaged cable. Remove damaged cable at once and replace with a new length using the appropriate Raychem splice kit. Replace damaged components. Re-use of the grommets, or use of the wrong grommet, can cause leaks, cracked components, shock, or fire.
This installation and maintenance manual is for nVent RAYCHEM Self-Regulating and Power-Limiting heat-tracing systems on thermally insulated pipes and vessels only. This includes nVent RAYCHEM BTV, HBTV, QTVR, HQTV, XTV, HXTV, KTV, VPL heating cables and the appropriate RAYCHEM components.
WARNING: Fire and shock hazard. nVent RAYCHEM heating cables must be installed correctly to ensure proper operation and to prevent electrical shock and fire. Read these important warnings and carefully follow all the installation instructions. • To minimize the danger of fire from sustained electrical arcing if the heating cable is damaged
