Search results
29 gru 2017 · What is the current transfer speed for all of these devices (HDD, ETH, USB)? Maximum theoretically speed for almost all devices in PS2 is: HDD ATA interface: ATA-66 (Roughly 66MB/s). Ethernet interface: 100Mbit (Or 12.5MB/s). USB 1.1 interface: 12Mbit (~1.5 MB/s). CD/DVD drive: 24x speed CD-ROM [3.6 MB/s], 4x speed DVD-ROM [5.28 MB/s].
- Open PS2 Loader
A collection of Tutorials and Guides all about Open PS2...
- Open PS2 Loader
3 lis 2022 · - Download HDD Raw copy tool and the clone image of your choice. - Use HDD raw copy to write the image to your storage device. When done, reconnect it to your PS2 to make sure it worked. It should boot to FreeHDBoot without any memory cards connected. - If it worked, go to ulaunchELF's HDD Manager.
28 lip 2024 · There are 3 types of speed tests available, sequential read, random read, and high throughput. The sequential read tests will read a sequential block of data up to 64MB or 16MB (depending on the test) using a few different block sizes and UDMA modes. It's designed to simulate the best case scenario when reading data from the HDD.
29 sty 2016 · WinHIIP is a PC application used to install PS2 CD/DVD images onto a hard disk drive for use by HDLoader or one of its many derivatives including the greatly enhanced Toxic OS produced for the DMS4 Pro chip by Team Toxic.
9 lis 2024 · Is the maximum HDD/SSD/SSHD file size determined by the PS2, the IDE/SATA adapter, the Network Adaptor or OPL? What's the official Network Adaptor maximum supported file size, 1 TB? How can I add games to the PS2's HDD/SSD/SSHD?
5 lis 2019 · Connect PS2 HDD (pre-formatted with uLaunchELF) to your PC. Fastest speeds obtained by connecting the drive directly to your motherboard. USB adapters will work, but speeds will depend on the quality of your adapter.
No. Due to the limitations of the PS2 bus you will get a negligible improvement. Like loading, instead of 4.2 second might be 4.1 or 4 seconds. If anything, you want the "slower" HDDs because the more modern the HDDs, the more likely you have to slow them down either by forcing Mode 1 and possibly even setting the DMA mode to MDMA0.
