Search results
This closer was designed for installation to garden gates and lightweight doors (non fire doors) where the * gate post or door frame is flush with the gate or door and where the hinge point is at the corner of the gate post or door frame (like a typical internal house door with butt hinges).
The Kant-Slam® is a hydraulic gate and door closer designed to push a door or gate shut with adjustable hydraulic speed control. Before installing the Kant-Slam® please read all instructions completely and order. If not, repair door or gate before mounting Kant-Slam®. General Mounting Instructions: The Kant-Slam® mounts on the hinge pin ...
View and Download D&D Technologies Tru-Close Mini-Multi Adjust Hinge installation instructions online. Tru-Close Mini-Multi Adjust Hinge locks pdf manual download.
Lockey TB250/450/650 Plus Pedestrian Gate Closers are suitable for medium use gates. To ensure the maximum life of the closer, follow the following instructions as closely as possible: 1) Encourage users to allow the gate closer to close the gate and not to push or pull the gate closed
INSTALLATION INSTRUCTIONS FOR GATE CLOSER Maximum Gate Weight-50kg Maximum Gate Width- 1000mm The closer can be fitted to the top, miadle or bottom of the gate on the "pull" side only. The gate face must be flush with the gatepost face and hinged as close as possible to the post.
Chain Link Gate Shut Installation 1. 2. Remove chain link retainer. 3. 4. Insert spring into top right hole of front clamp piece and rotate into place. Place back piece of clamp and install bolts finger tight. 5. Rotate clamp to adjust spring tension and tighten bolts. 6. 7. 8. Final installed Gate Shut spring. A B C To reverse the gate swing ...
A helical door spring with pivoted arm. This closer will close gates up to 80kg. The arm locates between 2 rollers mounted on the door to eliminate wear on the door. The closing speed is adjusted by inserting the tension bar supplied and increasing or decreasing the tension as required.
