Search results
The employer must ensure guardrail systems meet the following requirements: 1910.29 (b) (1) The top edge height of top rails, or equivalent guardrail system members, are 42 inches (107 cm), plus or minus 3 inches (8 cm), above the walking-working surface.
Guardrail systems. Guardrail systems and their use shall comply with the following provisions: 1926.502 (b) (1) Top edge height of top rails, or equivalent guardrail system members, shall be 42 inches (1.1 m) plus or minus 3 inches (8 cm) above the walking/working level.
The standard requires guardrail systems and components to be designed and built to meet the requirements of § 1926.502 (b) (3), (4), and (5). This appendix serves as a non-mandatory guideline to assist employers in complying with these requirements.
The employer must ensure guardrail systems meet the following requirements: (1) The top edge height of top rails, or equivalent guardrail system members, are 42 inches (107 cm), plus or minus 3 inches (8 cm), above the walking-working surface.
11 kwi 2024 · This article aims to simplify and summarize the key points of OSHA 1926.502(b), which addresses the requirements set forth by OSHA for proper Guardrail Systems. We provide actionable insights for construction professionals to utilize on their next guardrail project.
The employer must ensure: (i) Each employee less than 4 feet (1.2 m) above dangerous equipment is protected from falling into or onto the dangerous equipment by a guardrail system or a travel restraint system, unless the equipment is covered or guarded to eliminate the hazard.
OSHA mandates specific height specifications for guardrails to ensure their efficacy. Understanding the minimum height and any exceptions or variations is crucial for compliance. OSHA (Occupational Safety and Health Administration) has specific requirements for guardrails to ensure workplace safety.
