Search results
The MSD can be mounted in the engine compartment as long as it is away from direct engine heat sources. It is not recommended to mount the unit in an enclosed area such as the glove box. When you find a suitable location to mount the unit, make sure the wires of the ignition reach their connections. Also be sure that the program dials can be ...
The MSD 6 Series Ignitions feature a capacitive discharge ignition design. The majority of stock ignition systems are inductive ignitions. In an inductive ignition, the coil must store and step up the voltage to maximum strength in between each firing.
WIRING. Wire Length: All of the wires of the ignition may be shortened as long as quality connectors are used or soldered in place. To lengthen the wires, use one size bigger gauge wire (10 gauge for the power leads and 16 gauge for the other wires) with the proper connections.
A good quality, helically wound wire and proper routing are required to get the best performance from your ignition, such as the MSD Heli-Core or 8.5mm Super Conductor Wire. Note: Solid Core spark plug wires cannot be used with an MSD Ignition. A helically, or spiral wound wire must be used.
A good quality, helically wound wire and proper routing are required to get the best performance from your ignition, such as the MSD 8.5mm Super Conductor Wire. Helically wound wires provide a good path for the spark to follow while keeping Electro Magnetic Interference (EMI) to a minimum.
Spark plug wires are very important to the operation of your ignition system. A good quality, helically wound, suppression-type wire and proper routing are required to get the best performance from your ignition, such as the super conductor MSD spark plug wires. Note: Solid Core spark plug wires cannot be used with the Universal EFI Ignition.
wire and proper routing are required to get the best performance from your ignition, such as the MSD Heli- Core or 8.5mm Super Conductor Wire. Helically wound wires provide a good path for the spark to follow
