Search results
For remote filter applications where no take off is shown, the only solution is to use a sandwich plate together with the existing filter bowl, with the filter removed. If space is limited, bowl and center bolt must be cut down to suit. Mocal brand sandwich plates and take offs for oil coolers.
Thermostatic sandwich plates provide an oil take off from the engine block to supply a feed to oil coolers and other external oil devices. These thermostatic sandwich plates will only circulate oil once it reaches 80 degrees C. This allows the oil to warm up quicker reducing engine wear.
These coolers, built to our specification since 1965 must rate as the single most commonly used component on racing cars world wide. The cooler consists of a variable number of aluminium pressed plates forming oil ways and end tanks, the oil ways contain turbulators.
Mocal's cast aluminum universal sandwich plate comes in all popular oil filter thread sizes allowing the user to plumb an oil cooler to any remote oil filter system in almost any engine. This sandwich plate also has a built-in 180°F (82°C) thermostat which bypasses the oil cooler until the oil has reached its minimum operating temperature.
Oil sandwich plate to fit between the oil filter and the cylinder block providing a supply and return for an oil cooler. Avaiable in a range of centre bolt options to match the original oil filter thread.
MOCAL sandwich plates include a built-in thermostat (180o degree) which accurately controls oil flow to the cooling device allowing for quick engine warm up plus oil system protection in cold climates.
Mocal take-off plates to suit various applications for fitting oil coolers or remote oil filter housings.
