Search results
7 mar 2019 · INSTRUCTIONS. The Pump should be mounted horizontally on a foundation and secured by Anchor Bolts. Install the pump as near to the suction source and as low as possible. Suction must be flooded. When using an elbow, valve, etc., the suction must have straight piping in length at least five (5) times the diameter of the pipe. 3.
Programming and Operating Manual 01/2021 A5E45320727002A/RS-AC/003 Introduction 1 Information about the library 2 Templates 3 Faceplate - Views 4 Description of the blocks 5 Maintenance station 6 Module drivers of the Soft Starter 7 Parameter A Technical data B Abbreviations C. Introduction. Information about the library. Templates. Faceplate ...
This book is written with the thought of being a general guide for people working with softstarter applications but also for those just interested in learning more about this type of starting method.
Refer Table A for recommended selection of 3TW72 starters. Table A: kW/HP Rating, thermal overload relay range & fuse rating, Coil Voltage, Maximum full load current for different types of motors. Recommended Submersible pump rating 5.5kW/7.5HP Max.
SIRIUS Soft Starter 3RW5 PCS 7 Library V9.0 SP2 Industrial Controls Soft Starter SIRIUS Soft Starter 3RW5 PCS 7 Library V9.0 SP2 Programming and Operating Manual 11/2019 A5E48190360002A/RS-AA/001 Introduction 1 Information about the library 2 Templates 3 Block icons and faceplate views 4 Description of the blocks 5 Maintenance station 6
Manual Industrial Controls Load Feeders and Motor Starters SIRIUS 3RM1 Motor Starter Edition 06/2016 siemens.com
The starter, cabling and the motor should be protected against short circuit conditions by adequately rated fuses or circuit breakers. The overload unit fitted to the starter should be set to correspond to the full load current of the motor, Some starters may be fitted with Thermistor