Search results
The steps below will guide you on how to access the Linksys Smart Wi-Fi Router settings without creating Linksys Smart Wi-Fi Account and signing in. 1. Launch a web browser. 2. In the Address bar, enter your router’s IP Address or “myrouter.local” then press [Enter].
- Manually setting up the Linksys Dual-Band WiFi Router
This article will provide instructions on how to manually...
- Manually setting up the Linksys Dual-Band WiFi Router
Setting up the Linksys Smart Wi-Fi Router is made easy using the Smart Setup Wizard using a compatible web browser. The Smart Setup Wizard is embedded in the firmware and is available even if the router does not have an internet connection or is in its default settings.
This article will provide instructions on how to manually set up the Linksys Dual-Band WiFi Router. Before you begin: Take note of the default WiFi name and password of your router located on a label at the bottom of the router.
connected to the router, open a web browser and enter . http://myrouter.local in a web browser or go to 192.168.1.1. The router will prompt you for password.
Internet Setup. Automatic Configuration - DHCP Static IP PPPoE PPTP L2TP Bridge Mode. Internet IP Address. Subnet Mask. DNS 1. DNS 2 (Optional) DNS 3 (Optional)
You also can enter 192.168.1.1 in a browser to start setup. If you are using a modem-router (gateway) and the modem-router uses 192.168.1.x subnet already, you might need to enter the IP address 10.0.1.1.
Linksys Smart Wi-Fi includes all of the tools to access roputer settings and apps to enhance you wireless home network. You can access Linksys Smart Wi-Fi on the web at www.linksyssmartwifi.com (You may want to bookmark this page.)