Search results
change the PrintServer’s password, enter the current password in the Current Password field, enter the new password in the New Password field, and then enter the
Setup PrintServer To run the wizard that sets up the PrintServer, click Setup PrintServer. Refer to the Quick Installation for details. Uninstall To uninstall the PrintServer from your computer, click Uninstall. About the Print Server Information Screen The Print Server Information screen shows status information for the PrintServer.
On the Set PrintServer’s Password screen, enter the PrintServer’s default password, admin, in the Current Password field. Enter a new password in the New Password field, and enter it again in the Verify Password field. Click Next. On the Wireless Settings screen, enter your wireless network’s SSID or name.
Follow these instructions to upgrade your PrintServer’s firmware: Download the firmware to your computer from the Verify Password Linksys website at www.linksys.com. After the password is successfully entered, the Printer Open the Bi-Admin Management utility. Status screen will appear.
On the Set PrintServer's Password screen, enter the PrintServer's default password, admin, in the Current Password field. Enter a new password in the New Password field, and enter it again in the Verify Password field.
WPSM54G English : Print Server Installation Wireless-G PrintServer 5 J. Select the appropriate PrintServer. If you cannot find the PrintServer, click Refresh List. Click Next. NOTE: If the PrintServer is already configured, you will be prompted for its password. Enter the password, and click Enter. K. If your network uses a router
To change the password, select Change Device Password, enter the new password in the Password field, and then re-enter the password in the Confirm Password field. • Protocol. Select the protocol you want to use for your network: TCP/IP, AppleTalk, NetBEUI, IPX/SPX.
