Search results
For interchangeable NH and NS Series linear guides, the ball slides and the rails are stocked separately. The ball slides are mounted on plastic provisional rails that allows for easy transfer of the ball slide to and from the steel rail. Provisional rail. Installation Procedures
The LM Guide is capable of receiving loads and moments in all directions whether they are gener-ated by the mounting orientation and position, the location of the center of gravity of the moving ob-ject, the position of the thrust, the acceleration, or the cutting resistance. Reverse-radial load. Lateral load. Radial load. MA. Moment.
Updated February 2019 || The best approach to specifying and sizing linear rails is to define the most critical parameters of the application first; narrow the choices based on these requirements; and then apply critical variables to make the final linear-rail selection.
Fully extendable telescopic linear slides consist of linear slides directly interconnected at the rails, the runners or with the help of an intermediate profile. To mount linear slides, countersinks in the rails and, depending on type of construction, threaded or countersunk holes in the
LM block may become detached from the LM rail and fall down. If an LM Guide will be used in an inverted position, take preventive measures such as adding a safety mechanism to prevent
A linear guideway allows a type of linear motion that utilizes rolling elements such as balls or rollers. By using re- circulating rolling elements between the rail and the block, a linear guideway can achieve high precision linear
Sliding element linear guides consist of a carriage or slide that rides over a surface known as a rail, way, or guide. Sliding contact occurs when the moving part directly contacts the rail section. Rolling element linear guides are either recirculating or non-recirculating.
