Search results
18 wrz 2019 · 10Base2 is a type of standard for implementing Ethernet networks. 10Base2 is sometimes referred to as thinnet (or “thin coax”) because it uses thin coaxial cabling for connecting stations to form a network. 10Base2 supports a maximum bandwidth of 10 Mbps, but in actual networks, the presence of collisions reduces this to more like 4 to 6 Mbps.
10BASE2 (also known as cheapernet, [1] thin Ethernet, thinnet, and thinwire) is a variant of Ethernet that uses thin coaxial cable terminated with BNC connectors to build a local area network. During the mid to late 1980s, this was the dominant 10 Mbit/s Ethernet standard.
10Base2 – protokół sieciowy dotyczący rodziny standardów Ethernet działający w paśmie podstawowym i prędkości 10 Mb/s (opisany przez standard IEEE 802.3a z 1985 r.). Protokół popularny na przełomie lat '80/'90 XX wieku, stopniowo wypierany w latach '90 przez standard 10Base-T (i jego udoskonalenia). Dziś rzadko spotykany.
10BASE2 (aussi appelé Ethernet Fin ou Thin Ethernet) est un standard Ethernet standardisant une couche physique dans le modèle OSI utilisant un câble coaxial fin. Celui-ci permet le transfert de données à des débits jusqu’à 10 Mbit/s .
10BASE2 and 10BASE5 are two older types of Ethernet that were commonly used in the past. Here’s a brief overview of each: 10BASE2: Also known as thin Ethernet or cheapernet, 10BASE2 used coaxial cabling to connect devices in a network.
Une version IEEE 802.3 10 base 2 est plus connue. Elle utilise un câble coaxial fin ( Thin Ethernet) avec une longueur maximum de 185 mètres pour 30 stations maximum. Chaque station est raccordée au coaxial via un T de type BNC, 50 centimètres minimum doivent séparer deux stations.
10 Base 2 An Ethernet connection method using RG58-AU coaxial cable and operating at 10 Mbps (sometimes known as Cheapernet or Thin Ethernet). Using a bus topology there each connection to a computer's network card is made by means of a ‘Tee connector’.
