Search results
24 kwi 2024 · Gateway settings screen You can also get your Wi-Fi information from a computer or device connected to your Wi-Fi network. This is useful if you, or someone else, have changed your Wi-Fi network name or password. Open Chrome, Firefox, Internet Explorer, or other browser window. Enter http://192.168.1.254 in the address bar.
Make sure your 2Wire or Pace gateway and computer are connected by an Ethernet cable, and the connection is secure on both ends. Log in to your gateway on the connected computer. View steps for logging in. 1.800.727.5835 hours menu options. Click Wireless. Choose or enter the following settings: Click Save.
Configuring the VoIP Phones To configure VoIP via the gateway user interface, follow these steps. 2wire.gateway.net Access the gateway user interface by opening a web browser and entering http:// Click the Voice Network tab.
Step 1: Enable Public Network Mode To enable Public Network mode: Access the Management and Diagnostic Console (MDC) by entering http://gateway.2wire.net/management in your browser’s address bar. In the left-hand navigation menu, click the Local Network - Configure link.
Type http://gateway.2wire.net/setup into the browser’s address line. When prompted to enter a key code, select the appropriate key code from the table on page 1, enter it into the key code field, and click...
Using your SaskTel Internet and In-home Wi-Fi. Troubleshooting your 2Wire, Pace, or ARRIS gateway. Your gateway information (default password, network name, and serial number) Setting up in-home Wi-Fi on your 2Wire or Pace gateway.
Use the network adapter configuration software or Windows network connection wizard to set the network name (SSID) and encryption key (WEP). The network name is the word “2WIRE” (in all capital letters), followed by the last three digits of the gateway serial number (for example, 2WIRE110).
