Search results
24 lis 2013 · One easy way to check, would be to put the spark plugs in the motor, connect the plug wires and put a timing light on each lead. If the timing light flashes, most likely, you have spark. The ignition circuits on the 50's is very hardy...if you have no spark at all, it could be the exciter, pulser wiring, or cdi.
30 lip 2016 · Try pulling over engine in the dark to verify no spark. Many of these older models will have a "neutral start switch" mounted on the shaft that is connected to the shift lever. It is located on that shaft just inside the oil case on the starboard side of the outboard.
21 sty 2012 · #1. Model year 2000 Honda BF15a 4-stroke won't start. Historically it has always started on the second pull, even after many months of no use. Problem started immediately after motor got pretty hot when it stopped passing water maybe 1/2 mile from destination.
If the engine fails to start, remove the spark plugs, clean and dry the electrodes, then reinstall the spark plugs and attempt to start the engine again. If used engine oil showed signs of water contamination, then a second engine oil change should be performed after running the engine for 1/2 hour.
13 gru 2011 · • Four-stroke outboard motors and personal watercraft applications: Due to potential fuel dilution or water contamination, change oil at the engine or watercraft manufacturer recommended interval.
...... .40.
Thank you for purchasing a Honda Outboard Motor. This manual describes the operation and maintenance of the Honda BF40A and BFSOA Outboard Motors. All information in this publication is based on the latest product informa- tion available at the time of printing. Honda Motor Co., Ltd. reserves the right to make changes at any time
