Search results
Operating Instructions 1. Connect inlet filter to FSC gun inlet. 2. Connect to Pressure Washer. 3. Turn water on and open valve. Open trigger gun for flow of water through nozzles. Nozzles must have flowing spray. If not, remove tips and clean; reassemble, making sure that groove of nozzle is parallel to spray bar.
- PROFESSIONAL FLAT SURFACE CLEANER
Operating Instructions 1. Connect to Pressure Washer. 2....
- SPECIFICATIONS FLAT SURFACE CLEANER
If the flat surface cleaner rotating arm is not spin-ning,...
- PROFESSIONAL FLAT SURFACE CLEANER
Operating Instructions 1. Connect to Pressure Washer. 2. Turn water on and open valve. Open trigger gun for flow of water through nozzles. Nozzles must have flowing spray. If not, remove tips and clean; reassemble, making sure that groove of nozzle is parallel to spray bar. Use thread sealant when installing nozzles. 3. Start Pressure Washer.
For the DCFSCP18GZ only: Grease the swivel with one or two grease gun pumps every 200 hours (or once about every 30 days of use). Use No. 2 general purpose waterproof lithium
General Pump 1174 Northland Drive • Mendota Heights, MN 55120 Phone: 651.686.2199 • Fax: 800.535.1745 www.generalpump.com • sales@gpcompanies.com Ref 300843 Rev.F 05-16 Operating Instructions 1.Bolt the two halves of the handle together with the two M6 x 60mm long bolts, nylok nuts and four washers.
PROFESSIONAL FLAT SURFACE CLEANER 8 DFSCP12 OPERATOR’S MANUAL GeneralPumpisa memberof theInterpumpGroup WARNING:ReadBeforeOperatingMachine ... Tampering with any part of this machine will void all warranties FROM GENERAL PUMP • full 12” Cleaning path • can be connected directly to a gun, lance or telescoping wand ... Layout 1 Created ...
If the flat surface cleaner rotating arm is not spin-ning, tilt the flat surface cleaner up so you can see the underside of the deck. If a nozzle is not spraying it is plugged and needs to be cleaned. The best way is to do this is to remove the nozzle (9/16" wrench) and tap it on a hard surface (be careful not to damage the threads). Sometimes
ITEM PART. PROFESSIONAL FLAT SURFACE CLEANER. FROM GENERAL PUMP. COMPENSATING GUN FEATURE. FULL 20” CLEANING PATH. HEAVY-DUTY ANODIZED ALUMINUM COMPONENTS. RUGGED ABS COVER. DCFSCP20 OPERATOR’S MANUAL. General Pump is a member of the Interpump Group. WARNING: Read Before Operating.
