Search results
16 lis 2012 · Directv receiver says 60 tilt 36 elevation. Messing with the tilt gets me 101/110 or 110/119 at the same time but I cannot get 101/110/119 at the same time which means my tilt must be off. Need the setting for zip code 256xx.
The Direct TV Satellite dish works great when properly pointed. The dish requires a line-of-sight connection and the correct alignment angle to receive the best possible signal. Direct TV offers alignment as a service to optimize the angle, but you can also work the angle yourself.
24 wrz 2024 · In this comprehensive guide, we’ll walk you through the process of aligning your DIRECTV dish without a meter, covering the essential tools, techniques, and tips to ensure a seamless setup. Table of Contents. Understanding The Basics Of DIRECTV Dish Alignment.
22 wrz 2017 · Use the buttons on your receiver or the remote to access the Direct TV Menu. Select “Fav’s & Setup,” then “System Setup.” Select “Satellite,” then select “Repeat Satellite Setup.” Enter your zip code and write down the numbers displayed for azimuth, elevation and tilt.
9 lis 2011 · Set the elevation and tilt to the markings on the dish. Use a compass and set the azimuth about 10 degrees East of the recommended setting. Slowly, a degree at a time, move the dish to the West until you get signals on the 101 satellite.
1. Press MENU on the remote control to bring up the Main menu. 2. Select Assistance, then Dish Pointing. 3. Select Enter ZIP Code. 4. Enter the ZIP Code for the satellite dish antenna installation location. 5. Record the elevation, azimuth, and tilt (oval satellite dish only) numbers below. Elevation ____________ Azimuth ___________
11 wrz 2013 · Most options will reset themselves after the meter is turned off and on. The only one that sticks is the Favorites list. To turn the meter off, press and hold the OK button. If the meter is plugged in, unplug it, turn it off by pressing and holding the OK button then plugging the meter in.
