Search results
18 paź 2011 · Set the elevation and tilt. Use a compass and set the azimuth aprox 10 degrees East of the recommended magnetic setting, then slowly rotate the dish West until the transponders on Satellite 101 light up.
16 lis 2012 · Directv receiver says 60 tilt 36 elevation. Messing with the tilt gets me 101/110 or 110/119 at the same time but I cannot get 101/110/119 at the same time which means my tilt must be off. Need the setting for zip code 256xx.
The Direct TV Satellite dish works great when properly pointed. The dish requires a line-of-sight connection and the correct alignment angle to receive the best possible signal. Direct TV offers alignment as a service to optimize the angle, but you can also work the angle yourself.
How to point your satellite dish. To receive DIRECTV broadcast signals, your satellite dish must be correctly positioned. This tool can help you position your DIRECTV dish on your own. Start by entering your five-digit ZIP Code below.
1. Press MENU on the remote control to bring up the Main menu. 2. Select Assistance, then Dish Pointing. 3. Select Enter ZIP Code. 4. Enter the ZIP Code for the satellite dish antenna installation location. 5. Record the elevation, azimuth, and tilt (oval satellite dish only) numbers below. Elevation ____________ Azimuth ___________
24 wrz 2024 · By using the correct azimuth and elevation values, you can ensure that the dish is pointing directly at the satellite, resulting in a strong and stable signal. Make sure to enter the correct values into your receiver or dish setup to ensure accurate alignment.
22 wrz 2017 · Use the buttons on your receiver or the remote to access the Direct TV Menu. Select “Fav’s & Setup,” then “System Setup.” Select “Satellite,” then select “Repeat Satellite Setup.” Enter your zip code and write down the numbers displayed for azimuth, elevation and tilt.
