Search results
16 lis 2012 · Directv receiver says 60 tilt 36 elevation. Messing with the tilt gets me 101/110 or 110/119 at the same time but I cannot get 101/110/119 at the same time which means my tilt must be off. Need the setting for zip code 256xx. Thanks.
25 sie 2011 · Go to www.dishpointer.com and determine the azimuth, elevation and tilt settings for your location. Determine that your mast is perfectly plumb. Set the elevation and tilt to the markings on the dish.
3 wrz 2021 · The definitive solution is available at DishPointer - Align your satellite dish. Put in your address (you should refine your dish location on the resultant map), select "DIRECTV SL3" under multi-LNB setups and click the "Search!" button. The "dish skew" number is what you're looking for.
11 wrz 2013 · Most options will reset themselves after the meter is turned off and on. The only one that sticks is the Favorites list. To turn the meter off, press and hold the OK button. If the meter is plugged in, unplug it, turn it off by pressing and holding the OK button then plugging the meter in.
How to point your satellite dish. To receive DIRECTV broadcast signals, your satellite dish must be correctly positioned. This tool can help you position your DIRECTV dish on your own. Start by entering your five-digit ZIP Code below.
22 wrz 2017 · Leave the screen on the “Dish Pointing” menu. Check that the elevation indication is aligned to the elevation you wrote down. Verify that the azimuth setting and tilt on the dish is correct as well.
When you subscribe to DirecTV and receive your satellite dish, be sure to aim it properly to receive a strong signal. A DirecTV professional installer can handle this task, or you can do it yourself. The main necessity is the left-to-right positioning coordinates known as your azimuth and elevation.