Search results
18 paź 2011 · Go to www.dishpointer.com and put in your location (you can select the photo version if you like) and the dish type. With the HR24, that would likely be either Directv SL3 or SL5. The result will give both true and magnetic. Set the elevation and tilt.
16 lis 2012 · Directv receiver says 60 tilt 36 elevation. Messing with the tilt gets me 101/110 or 110/119 at the same time but I cannot get 101/110/119 at the same time which means my tilt must be off. Need the setting for zip code 256xx.
24 wrz 2024 · Be patient and take your time to ensure that the dish is aligned correctly. You may need to make adjustments to the dish’s position, azimuth, and elevation values to achieve the best possible signal. With practice and patience, you can successfully align your DIRECTV dish without a meter.
How to point your satellite dish. To receive DIRECTV broadcast signals, your satellite dish must be correctly positioned. This tool can help you position your DIRECTV dish on your own. Start by entering your five-digit ZIP Code below.
Your TV is likely not working well and may have a "no signal" message displayed. Attempt a simple power cycle to clear this message. After cycling the power, access the settings and select "view signal strength." Choose "signal meters_"_ and each transponder will test for signal.
22 wrz 2017 · Use the buttons on your receiver or the remote to access the Direct TV Menu. Select “Fav’s & Setup,” then “System Setup.” Select “Satellite,” then select “Repeat Satellite Setup.” Enter your zip code and write down the numbers displayed for azimuth, elevation and tilt.
11 wrz 2013 · Start with the azimuth, which is the compass heading of the dish. At this point if you’re using a Slimline dish it’s also a good idea to set the elevation (up and down) and tilt (rotation of the dish so that one side is lower than the other. You can fine tune these later as necessary.
