Search results
General Construction and Water Notes: 1. Projects located in Distributor Contract Areas shall require the District to contact Denver Water’s Construction Engineering personnel at 303-628-6671, prior to the pre-construction meeting. 2. All materials and workmanship shall be in accordance with Denver Water’s
Forms are required for a variety of construction projects. Please contact a Tap Sales representative at 303-628-6100 for additional information about new taps or construction. Tap Application Packet (includes Application for Water Supply License) Note: In Denver and Total Service areas, the easement documents are prepared by Denver Water.
An acceptable street cross-section template in accordance with Denver Water’s Engineering Standards on the water only plan is required; must show other utilities, surfacing type, thickness, and easement delineation.
pipelines of a potable water supply by the installation of a BFPA or method. Also called BFPA. backpressure: An increase in pressure in the downstream piping system that can cause a reversal in the normal direction of flow at a particular point. The increase in pressure can be caused by pumping, air pressure, or the elevation of piping.
22 sty 2023 · The purpose of a pump chart is to give pump operators a shortcut to the values they need to place into the variables to calculate the total Pump Discharge Pressure (PDP). The values that a pump chart provides are designed to get the pump operator within a range of an effective fire flow.
Use the formula below to calculate water column to pressure per square inch. This applies to water column measured in inches only. Water Column (inches) ÷ 27.708 = PSI
Pipe Sizes For Water Distribution System Design D-1. This appendix contains information to help determine pipe sizes when designing a water distribution system. Use Table D-1 and Tables D-2 through D-4, pages D-3 through D-6 to determine pipe sizes. Table D-1. Capacities of Galvanized-Steel/Iron Pipe (in GPM) Length of Pipe (in Feet) Pressure ...
