Search results
CT-1 The CT-1 Chamfering Tool cut a 45 degree bevel on the insulation of cables with an O.D. of 12.7 – 34.9mm. The CT-1 chamfers cable ends at 45 degrees and is for use on 4.4 – 8.7mm i...
Chamfering tool creates a 45° bevel approximately 0.125″ (3.17 mm) in length; Easily adjusts to fit cable diameters from 0.65″ to 1.875″ (16.51 to 47.63 mm) Suited for XLPE insulations; Features safe, recessed blades to prevent injury & blade damage
Chamfers cable end at 45 degrees; For use on .175" to .345" insulation (15kV thru 35kV) Prepares edge of cable insulation for pre-molded termination; Adjustable - no adapters or bushings required
Easily adjusts to suit XLPE & EPR insulation materials on 0.5″ to 2.36″ (12.7 mm to 60 mm) cable diameters. 30 degree or 45 degree angle bevel models perform with a factory-set chamfer depth of 0.075″ (1.905 mm), adjustable from 0″ to 0.150″ (0 mm to 3.81 mm); 15-35 kV.
• Ergonomic end stripping tools for 600 volt secondary cable - designed for use with a low or variable speed power drill • Tools designed to reduce working time and effort on repetitive stripping functions • New adjustable strip stop with adjustment window allows easy setup for precise strip lengths from 0.625 in. (15.9 mm) to 2.5 in.
Precision chamfering tool designed for 25 to 80 mils (0.635 to 2.032 mm) thick semi-con on cable diameters from 0.76″ to 2″ (19.3 to 50.8 mm) Easily adjusts to fit the cable diameter. Features safe, recessed blades to prevent injury & blade damage.
The IC 1 and IC 2 chamfer 15 to 35kV cables and adjusts easily to fit different cable insulations including XLPE insulations. The complete operation takes 10 seconds or less and blades are recessed to prevent injury and blade damage.
