Search results
1 maj 2016 · The gain of the antenna is determined by the design of the antenna. You will change this setting only when you replace the antenna with let say a 6dB antenna. Then you will set it to 6.
27 maj 2016 · What are good settings to use for Tx Power and Antenna Gain with dd-wrt on my router (WNDR3700v1)? Currently, it is set to the defaults of 20dbm for Tx power and 0dbi for antenna gain. I want to push the envelope without getting the FCC to come knocking at my door. Has anyone done this before?
EIRP is TX power plus antenna gain, example: * 20 dBm TX power with a 10 dBi gain antenna has an EIRP of 30 dBm. 24 dBm TX power with a 6 dBi gain antenna has an EIRP of 30 dBm. Maximum EIRP varies by nation and your max TX power will be capped by the regulatory domain if you have a powerful radio.
4 paź 2005 · Under Advanced set the TX Power, Antenna Gain, Protection Mode: RTS/CTS, RTS Threshold enabled, Short Preamble enabled. For IP Filter Settings (adjust these for P2P) set TCP Congestion Control...
17 paź 2017 · The DD-WRT has the TX at 30 and gain at 0. Linksys lists this for the antennas: Antenna Gain (listed per Antenna if multiple): 2.4GHz: 2.5dBi (peak) 5GHz: 3.8dBi (peak)
In this guide i show u how to adjust p2p or p2mp antenna systems with atheros based systems. There are many ways to check your connection. Some work out of the box.
Antenna Gain. Available Settings: 0 ~ 999 Default Setting: 0 dBi Recommended Setting: 0 dBi Antenna gain is amount of "gain" or "boost" of signal that the antenna provides. Its a bit complicated but remember this, antennas are not amplifiers. They do not magnify the signal, but instead "focus" the signal in certain directions, yes even omni ...
