Search results
A method for determining aluminum during water treatment is described. The procedure, which involves filtration and cation exchange to isolate specific aluminum fractions followed
29 lip 2021 · We investigated the correlation under different hydraulic conditions and water treatment efficiencies including changes in removal of turbidity, ultraviolet adsorption at 254 nm (UV 254) and dissolved organic carbon (DOC).
15 maj 2011 · The impact of OH − /Al 3+ and Si/Al molar ratios on the coagulation performance, mechanism and residual Al speciation of PASiC in surface water treatment was discussed as a function of coagulant dosage. It was intended to provide an insight into the relationship between coagulation performance and residual Al.
1 sty 2009 · Electrocoagulation (EC) is an electrochemical method of treating polluted water where sacrificial anodes corrode to release active coagulant precursors (usually aluminum or iron cations) into solution. At the cathode, gas evolves (usually as hydrogen bubbles) accompanying electrolytic reactions.
25 sty 2024 · The use of Al 2 (SO 4) 3 in water treatment has demonstrated significant results in modifying the TAC of water. When applied under initial pH conditions ranging from 7.65 to 8.19, this coagulant has shown exceptional effectiveness in reducing water TAC.
Aluminum silicate (or aluminium silicate) is a name commonly applied to chemical compounds which are derived from aluminium oxide, Al 2 O 3 and silicon dioxide, SiO 2 which may be anhydrous or hydrated, naturally occurring as minerals or synthetic.
15 kwi 2013 · Yan et al. (2008a) reported that the dissolved residual aluminum concentrations for high-basicity (basicity = OH/Al = 2.0 or OH/(Al × 3) × 100 = 67%) PACl at acidic and basic pH (<5.5 and >7.5) were lower than that for medium-basicity PACl and AlCl 3.
