Search results
7 lip 2022 · New tires have an average tread depth of 8 to 9 millimeters (10/32 to 11/32 inches). As you drive, the tread will wear down. A tire with a tread depth below 1.6 millimeters (2/32 inches) lacks grip. Braking distance and vehicle control are impaired. How can you tell if tires need to be replaced?
The typical new tire used on automobiles is measured with 10/32” to 11/32” of tread depth. With winter/snow and light truck tires the tread is deeper because this depends on the tire’s tread type, which is either the Highway Rib, Highway All-Season, Off-Road All-Terrain or Off-Road Maximum Traction.
1 sie 2022 · To obtain an accurate tread depth for your current tires, you'll need to use a tread depth gauge. This tread wear depth chart shows the acceptable tread measurements, measurements that are suggested to replace tires, and minimum safe tread level.
19 maj 2022 · The average tread depth on new tires is 10/32 to 11/32 inches, about 8 or 9 millimeters. As the vehicle's mileage increases, this number will drop lower and lower. A good tire tread depth for most conditions is usually 6/32 and higher.
17 lip 2023 · What is the tread depth on a new tire? The tread depth on a new tire is usually around 10/32 of an inch or 8mm. This varies depending on the manufacturer and the type of tire, but it is generally around this depth. All-terrain and mud tires have much bigger tread, it can be up to 1 or even 1.5 inches.
6 lut 2024 · This shows how your tire’s tread is doing and how well your tire should perform. It’s indicated with a number called the UTQG Rating. Higher numbers usually mean the tread lasts longer, but remember, it’s not a perfect measure.
5 paź 2022 · An acceptable tread depth difference is usually recommended to be between 2/32″ and 6/32″ by most manufacturer’s of all wheel drive vehicles. Refer to your owner’s manual for specific recommendations.
