Search results
14 lut 2012 · I'm renovating my bath and am interested in a walk-in shower area (i.e. no doors). How can I calculate a "safe" distance from the shower head for the door area? Are there design guidelines for distance (and perhaps direction) that water is expected to splash?
We're converting a tub/shower to a walk-in shower (~5'x3') and can't figure out how far the ceiling mounted rainhead should be mounted from the wall with the controls and shower head bar. We'll be using the Grohe "Grotherm SmartControl" that allows both heads to be active at the same time,...
29 sie 2018 · The minimum floor slope that we’d recommend is 1-2% grade. But how is the grade calculated? Each 30cm gradient drop over a 30-metre length is 1%. If the distance is 3 metres, then the gradient should fall roughly 6cm from the highest point to the drain to create a 2% slope.
24 paź 2023 · Refer to your shower pan dimensions and measure an equal distance from the short side walls to find the midpoint. Double-check your measurements and marking before drilling any holes! Pick the Right Wall for Optimal Use
23 lut 2021 · Standard building code recommends a minimum of 30 inches of walking space between bathroom fixtures, so leave adequate room to walk between the new shower and the vanity or commode.
22 kwi 2024 · We will cover standard-sized walk-in showers, recommended dimensions for small and large bathrooms, non-standard walk-in shower designs, and practical tips for choosing and optimizing walk-in shower dimensions.
When planning a walk-in, floor-level shower, you have various options available to you: The modern, extra-shallow shower tub (made of enamelled steel or sanitary acrylic) is installed practically at floor-level and merges visually with the floor area.
