Search results
Figure 1: Wiring Schematic for power applied to the load when the liquid level is less than the set point (power to the load is interrupted when the level increases to above the set point).
7 sie 2021 · In this video I hope to explain how to install a liquid level control correctly This circuit can be used to transfer a liquid substance from one tank to another.
LS200 Liquid Level Switches with 2” NPT mounting are float activated to operate an electrical SPDT snap switch (optional DPDT on some models) for alarm or shutdown of an engine or electric motor. The LS200 connects directly into the vessel wall and can be used with a Murphy weld collar (P/N 15050375) or Murphy external float chamber.
The LLS 4000/4000U liquid level switch is designed to detect the state (gas or liquid) of the refrigerant in front of the sensing head, while installed in a wide range of refrigeration applications. The LLS level switch comes in 2 variants, LLS 4000 and LLS 4000U. They are identical except for the connector thread interface to the system.
This manual provides information on the Model TK1 Float Level Switch. It is important that all instructions are read carefully and followed in sequence. Detailed installation and wiring instructions are included in this manual.
To ensure the best performance from your equipment it is important that the attached liquid level switch is installed and maintained correctly. This document provides an overview of SST Sensing’s liquid level switches including mounting information, operating principle and fluid compatibility. . Contents.
Please refer to attached wiring diagram for DIP switch (SW1) and relay energization switch settings (S1). • The level switch factory default settings are configured for liquid level and relay energized
