Yahoo Poland Wyszukiwanie w Internecie

Search results

  1. I find [he or she] has met the applicable requirements of § 61.93, and is proficient to make solo cross-country flights in a [make and model] aircraft, [aircraft category]. 10. Solo cross-country flight: § 61.93(c)(3)

  2. Solo cross-country flight: §61.93(c)(1) and (2) I certify that has received the required solo cross-country training. I find [he or she] has met the applicable requirements of §61.93, and is proficient to make solo cross-country flights in a [make and model] aircraft, [aircraft category].

  3. Prepare, present, and explain a cross-country flight plan assigned by the evaluator, including a risk analysis based on real-time weather, to the first fuel stop PA.I.D.S2: Apply pertinent information from appropriate and current aeronautical charts, Chart Supplements; Notices to Air Missions (NOTAMs) relative to airport, runway and taxiway ...

  4. I find [he or she] has met the applicable requirements of § 61.93, and is proficient to make solo cross-country flights in a [make and model] aircraft, [aircraft category]. 2. A.10: Solo cross-country flight: § 61.93(c)(3). have reviewed the cross-country planning of [First name, MI, Last name].

  5. 1 lis 2022 · Below, you’ll find a “filled out” example of a cross-country flight plan, simulating a fictitious flight from Deer Valley, Phoenix, to Prescott. Under each heading in the flight plan, you’ll find a number and a description of what is going on and what you must do to complete your flight plan.

  6. Cross Country flight must include a landing at an airport more than 50 nautical (not statute) miles from the original point of departure. Additional cross country requirements apply – e.g. night XC must be over 100nm total. The long solo XC has to include one leg of over 50 nm, plus be over 150 nm total.

  7. Solo Training Requirements. 10 hours minimum of solo flying in a single engine airplane on the Private Pilot areas of operation including: 1 solo cross country flight of at least 150nm total distance with full stop landings at 3 points and one segment of at least 50nm between.