Search results
Clamps on RF cables must fit without crushing and must be snug enough to prevent the cable from moving freely through the clamp, but may allow the cable to slide through the clamp when a light axial pull is applied.
Cable clamps should be installed with regard to the proper mounting angle. [Figure 20]
Rigging involves setting cable tension, adjusting travel limits of flight controls, and setting travel stops. In addition to the flight controls, rigging is also performed on various components to include engine controls, flight deck controls, and retractable landing gear component parts.
11 wrz 2017 · The only way to accurately inspect cables for internal damage is to remove the cables from the aircraft and flex them manually while inspecting them under a magnifying glass for damage. Since the labor to remove, install, and rig aircraft cables is generally higher than the cost of the cable itself, it generally makes sense just to replace your ...
1.01 This procedure provides general information for the installation of aerial fiber optic cables. The methods described are intended for guideline use only, as it is impossible to cover all the various conditions that may arise during an installation.
All aircraft set their altimeter to the ICAO standard air pressure of 1013,2 hPa. The ALPHAMFD has a special function to set this very easily. By pressing the >ARROW UP< and >ARROW DOWN< keys simultaneously, the altimeter is set very quickly to 1013,2 hPa (QNE). Now the altitude is shown in flight level.
Raychem cable clamps have a patented design which optimises clamping force at both the attachment point, and the cable by securing each clamp half separately. Cables can be aligned and located in the lower half of the clamp prior to final tightening. Easy product identification.
