Search results
7 kwi 2011 · Launch a web browser. Enter the AirStation's IP address in the address field, then press the [Enter] key. If Router LED is off or no router LED, the AirStation is in Bridge Mode and the default IP is 192.168.11.100.
The AirStation may be used as either a full wireless router or a simple access point. The switch has three positions: ON (Router Mode) - The default LAN-side IP address is 192.168.11.1 and DHCP and NAT are enabled. OFF (AP Mode) - The default LAN-side IP address of the AirStation is 192.168.11.100, and DHCP and NAT are disabled.
In your browser’s address field, enter “192.168.11.100”. This will take you into the Web-Based Configuration Utility for the second AirStation. Once again, the username is “root”...
The router’s settings page should open. Enter the router’s username and password (“admin” and “password” by default). You should now be able to reconfigure your settings and change your password for the router.
To configure the AirStation, log in to Settings as shown below. 1 Launch a web browser. 2 Enter the AirStation’s LAN-side IP address in the address field and press the Enter key. Notes: • The AirStation’s default LAN-side IP address depends on the mode. • In router mode: 192.168.11.1 • In access point mode: 192.168.11.100
AirStation's default IP address is 192.168.11.1 in router mode or 192.168.11.100 in
*In AP mode (mode switch BRI), the default IP address is 192.168.11.100. †If you ran the Automatic Installation program, you may have changed your password for the Web Admin Tool. If so, use the password you set. To reset the password to a blank field, hold down the Init button on the AirStation until the Diag LED flashes.
