Search results
3 lip 2012 · Wing needle entredeux is stitched over 11″ sleeve gathered to 5 1/2″. Entredeux is also stitched along the sleeve edge. The 1/2″ excess fabric was trimmed away and then the lace was butted to the entredeux and joined with a zig zag.
6 wrz 2013 · Gathered lace to entredeux: 1. Trim waste fabric from one side of entredeux. 2. Gather lace to desired fullness to fit entredeux strip by pulling the uppermost thread in lace header. Pin strip of gathered lace to ironing board or padded surface right side up. Adjust gathers evenly. 3. Cut a piece of Tiger Tape the length of gathered lace strip.
8 mar 2012 · Make entredeux trim with this heirloom sewing tip using your sewing machine and a wing needle.
20 sie 2010 · Pin the Entredeux to the Fabric. Be sure to trim the entredeux selvage if necessary to match the seam allowance of your garment. The seam allowance for this sleeve is 1/4". The entredeux did not need to be trimmed. But you must measure each entredeux because the selvages can differ.
3 cze 2014 · 1. Do not trim the entredeux. Place the entredeux and fabric right sides together, with raw edges even. Photo 1. 2. With the entredeux on top, use a straight stitch (L=2.0) to stitch in the ditch right along the "ladder" of the entredeux (see photo 1). Photo 2. 3. Trim the seam allowance to 1/8 inch.
30 sty 2010 · To gather lace, pull the very, very, very top thread in the lace heading. If it doesn't pull easily, try a different thread. Pull a thread in the lace heading (the straight part of the lace made up of several threads) to gather. Pull very gently and don't be in a hurry or the thread might break.
17 paź 2019 · Using the single Entredeux, trim the batiste edge off one side and attach to a lace side of the Fancy Band. Use simular machine settings. The Length will still be 1 but the Width may be a little narrower at 1.9.
