Search results
Cross-country time means— (i) Except as provided in paragraphs (ii) through (vi) of this definition, time acquired during flight— (A) Conducted by a person who holds a pilot certificate; (B) Conducted in an aircraft; (C) That includes a landing at a point other than the point of departure; and
The FAA has at least seven different definitions of what is a cross-country and what is not a cross-country. The usual definition is a flight between two airports that are more than 50 nautical miles apart, but there are several variations of the rule.
3 paź 2017 · To act as PIC under FAR Part 135, pilots must have either 100 hours of cross country time for VFR flights or 500 hours of cross country time for IFR flights. These Part 135 requirements follow the FAA's basic definition of cross country flight as being "point to point."
Cross Country. By definition, cross-country time includes any flight conducted by a pilot in an aircraft that includes a landing at a point other than the point of departure that includes the use of dead reckoning, pilotage, electronic navigation aids, radio aids, or other navigation systems to navigate to the landing point. Reference: 14 CFR ...
Approved, unless used with reference to another person, means approved by the FAA or any person to whom the FAA has delegated its authority in the matter concerned, or approved under the provisions of a bilateral agreement between the United States and a foreign country or jurisdiction.
Cross-country flights are flights conducted outside of the local area, defined as flying greater than 50 NM from the departure airport.
cross-country flight time. Because a safety pilot does not conduct the entire flight, a person acting as a safety pilot for a portion of the flight may not log any cross-country flight time for the flight. In your example, Pilot A may log the entire flight (2.2 hours) of cross-country flight time because that pilot conducted the entire flight.
