Search results
19 lut 2021 · 5 tips that will assist in identifying and preventing your thread and your machine's threading from causing stitching and performance issues.
22 cze 2020 · Third, you may have threaded the machine wrong, set the tension too tight or set the stitch length to 0. That covers most thread issue and just re-thread the machine, reset the tension and stitch length to get out of that predicament. Then check your bobbin area to see if it is full of lint.
29 paź 2023 · Various tension issues could arise when using a sewing machine, even when using your Janome model. How to fix them and do it well is what will determine its functionality. 1. Incorrect Threading. Incorrect threading can result in the knots of thread under the sewing machine. It is a primary problem.
Janome sewing machine troubleshooting involves simple fixes such as cleaning lint build-up and removing thread tangles. More complex problems like upper and lower tension problems, jammed fabric feed, or odd noises take more work. Stitching issues such as loose, knotted, or wavy seams also need attention.
3 lip 2012 · Consumer machine made entredeux was stitched over the shoulder seam. Note that commercial entredeux was used at the neckline for the extra strength needed for an active child’s garment. Note also that the entredeux is stitched with yellow yellow 80 wt. Madeira Cotona thread. This is the yoke to my granddaughter’s Easter dress.
The standard upper thread tension should be 65–95 g when pulling the thread (cotton thread #50) in the direction of (B) with setting the tension dial at "3". (make sure the foot should be lowered.)
If the upper or lower thread tension is too loose or too tight, it can result in uneven stitches, thread breakage, or puckering. To fix this problem, check the threading of the machine, and make sure that the thread is properly seated in the tension discs.
