Search results
1 maj 2020 · It is desirable that the line from home base through the pitcher’s plate to second base shall run East-Northeast. It is recommended that the distance from home base to the backstop, and from the base lines to the nearest fence, stand or other obstruction on foul territory shall be 60 feet or more.
Measure and mark the proper distance of the pitching plate (rubber) from home plate. The pitching plate (rubber) is measured from the front edge and center of the pitching plate (rubber) to the APEX of home plate. The front edge of home plate is 17 inches in front of the apex.
The recommended distances for the outfield are 400ft from the home plate to the centerfield and a minimum off 330ft from the home plate to the end of the foul lines, with the fences rounded out to match the recommended distances.
It is recommended that the line from home plate through the pitcher’s plate to second base run east-northeast. This line, using a steel tape or a strong tape or a cord, must measure 127 feet, 3-3/8 inches from the rear tip of home plate to the middle of second base.
Check with your ruling jurisdiction for the proper distance between the backstop and home plate (see Baseball Field Dimensions Diagrams). The backstop-to-home-plate should be a continuation of the field centerline from home plate to centerfield. Place a pin, stake, or marking flag where you want the point of home plate (apex) to be located. 3.
The back tip of home plate must be 127 feet, 3 and 3/8 inches away from second base. The other bases must be 18-inch squares that are between 3 and 5 inches thick, covered by white canvas or rubber and filled with soft material.
You can calculate the length of a path, running route, fence, border, or the perimeter of any object that appears on a google map. The distance calculator will then display a measurement of the length in feet, meters, miles and kilometers.
