Search results
Calculate distances between locations with MapQuest's distance calculator tool, providing accurate measurements for travel planning.
The back tip of home plate must be 127 feet, 3 and 3/8 inches away from second base. The other bases must be 18-inch squares that are between 3 and 5 inches thick, covered by white canvas or rubber and filled with soft material.
The recommended distances for the outfield are 400ft from the home plate to the centerfield and a minimum off 330ft from the home plate to the end of the foul lines, with the fences rounded out to match the recommended distances.
3 maj 2023 · Depending on the league, the backstop should be 20 to 60 feet away from the home plate’s back tip. To measure the home to backstop distance, you need to locate the center of the backstop with measuring tape and measure the distance from it.
Check with your ruling jurisdiction for the proper distance between the backstop and home plate (see Baseball Field Dimensions Diagrams). The backstop-to-home-plate should be a continuation of the field centerline from home plate to centerfield. Place a pin, stake, or marking flag where you want the point of home plate (apex) to be located. 3.
The skinned infield must extend at least 3 feet past the foul line before grass starts and backstops must be a minimum of 25 feet from the back of home plate. The accepted diameter for the pitching area is 16 feet.
Mound to home plate distance - The distance between the pitcher's plate and home base (the rear point of home plate) shall be 60 feet, 6 inches. Base paths/distance - The infield shall be a 90-foot square. When location of home base is determined, with a steel tape measure of 127 feet, 3 3/8 inches in desired direction to establish second base.
