Search results
Solo Training Requirements. 10 hours minimum of solo flying in a single engine airplane on the Private Pilot areas of operation including: 1 solo cross country flight of at least 150nm total distance with full stop landings at 3 points and one segment of at least 50nm between.
requirements for the Private Pilot are: Must be a Private Pilot to take off and land within (KSFO) Class B Airspace (AIM 3-2-3) and can fly at night. Must maintain currency to carry passengers:
1 lis 2022 · You can fly cross-country using visual flight rules. In fact, according to 14 CFR 61.109 , you must do so to gain your private pilot’s license. This will all be achieved using visual flight rules, navigating using ground features, accurate flying, and timing.
16 sty 2022 · You should plan out the entirety of the flight, including the departure and arrival, the route, alternate airports, waypoints, fuel, weather, and other factors before you climb into the cockpit so that you’re prepared to deal with any situation that might arise during the flight.
INTRODUCTION. This workbook consists of multiple forms intended to guide applicants in preparation and organization for the practical test in accordance with the Airman Certification Standards (ACS). Complete guidance on its use before and during the practical test is provided in the Answers to the ACS Private Pilot ASEL manual.
Route Planning. review navigation log and discuss necessary information. basic way to plan a route: choose destination, and use a chart to draw a straight line from departure to destination. adjust line for the following criteria: use of landmarks.
Cross Country flight must include a landing at an airport more than 50 nautical (not statute) miles from the original point of departure. Additional cross country requirements apply – e.g. night XC must be over 100nm total. The long solo XC has to include one leg of over 50 nm, plus be over 150 nm total.
