Search results
Primary Setup This page lets you change the LAN (Local Area Network) settings on your WBR-6020 N_Max Wireless Router and WAN (Wide Area Network) connection. LAN IP Address: The local IP address of this device. The computers on your network must use the LAN IP address of your product as their Default Gateway. You can change it if necessary.
Try to turn off the router and your ADSL/Cable modem. Wait 30 seconds and then turn the devices back on. If you still have problems, then access the router’s configuration page and check whether the router has obtained an Internet IP Address in the Status page. If the above does not work, please contact your Internet
Try to turn off the router and your ADSL/Cable modem. Wait 30 seconds and then turn the devices back on. If you still have problems, then access the router’s configuration page and check whether the router has obtained an Internet IP Address in the Status page. If the above does not work, please contact your Internet
Costumers from the rest of the world contact, please: support.asia@level1.com
Setup 1. Open your preferred Web Browser (Internet Explorer recommended) and the Easy Sign On setup wizard should automatically start. Note: If Easy Sign On does not start, please type in the address http://192.168.0.1, enter Username and Password (see page 2) and click Quick Start. The Quick Start process is the same as Easy Sign On.
After logging in to the router through your browser, select [Advanced Setup] then click [Enter]. Select [Primary Setup] on the left-hand side. Click [Change] under [WAN Type].
One RJ-45 Broadband Internet connection via cable modem or xDSL modem Instructions from your ISP on what type of Internet access you will be using, and the addresses needed to set up access
