Search results
Brampton Brick standard concrete units are designed to be used primarily for exterior load-bearing and foundation walls. Our lightweight blocks are designed for interior applications due to their higher fire
Lightweight aggregate, dense concrete and autoclaved aerated (Airtec) building blocks for walls, foundations and flooring applications manufactured in various grades of strength and density and a range of sizes for use in the construction industry. COMPOSITION: Ultralite: Cement,expandedclayaggregate, pumice.
Concrete Block are commonly referred to as “CMUs” (Concrete Masonry Units), “Grey Block” or simply “Concrete Block.” The following are key terms commonly used to further describe different types of concrete block. A. Scored/Concave Flute B. Stretcher End (Mortar Groove) C. Breaker D. Sash Groove E. Plain End F. Rectangular Core G ...
Solid Dense Concrete Blocks with a ‘Standard’ finish provide an excellent surface for mortars, renders and plasters. They are the most durable and resilient block in our product range, making them perfect for higher strength, acoustic and applications where durability and toughness is required.
Typically, concrete masonry units have nominal face dimensions of 8 in. (203 mm) high by 16 in. (406 mm) long, although other nominal face dimensions are available that accommodate an 8 in. (203 mm) module.
Plasmor are committed to minimising the weight of its range of building blocks to improve the safe handling of blocks in compliance with Health and Safety requirements. Health and Safety Executive legislation exists to ensure the safe manual handling of blocks and safe working practices.
be spaced 8m centre for concrete units and at 6m centre for light weight units where walls are not interrupted by full height doorways or window openings. General Guidelines - All concrete blockwork should be laid dry, so covering on site is recommended. Whenever work is stopped, the tops
