Search results
1 solo cross country flight of at least 150nm total distance with full stop landings at 3 points and one segment of at least 50nm between T/O and landings; and 3 T/O’s and landings to a full stop at an airport with an operating control tower.
10 hours minimum of solo flying in a single engine airplane on the Private Pilot areas of operation including: 1 solo cross country flight of at least 150nm total distance with full stop landings at 3 points and one segment of at least 50nm between.
(i) One cross-country flight of over 100 nautical miles total distance; and (ii) 10 takeoffs and 10 landings to a full stop (with each landing involving a flight in the traffic pattern) at an airport.
Here you can find resources to help you on your journey to becoming a private pilot. There are certain requirements that must be met, maneuvers that must be logged, and knowledge areas that must be covered as you move from pre-solo → solo → cross country → checkride prep → checkride with a Designated Pilot Examiner (DPE).
19 lut 2019 · A cross-country solo flight must consist of: Flight of 50 nautical miles total point to point distance from the departure airport to another airport. There is also a long cross country required that must be: flight of 150 nautical miles total distance. full-stop landings at three points.
16 sty 2022 · If the flight is being conducted under Instrument Flight Rules (IFR), you need enough reserve fuel to fly to your planned alternate airport, and 45 additional minutes of cruise flight. If you’re flying IFR, your flight is governed by CFR § 91.167 .
A student pilot must obtain an endorsement from an authorized instructor to make solo flights from the airport where the student pilot normally receives training to another location. A student pilot who receives this endorsement must comply with the requirements of this paragraph.
