Search results
5 kwi 2024 · OSHA 1004 (fully validated) Notes: SKC no longer makes the Anasorb CMS media listed in Method 1004. In order to obtain defensible and quantitative results for MEK, sampling must be done with the passive sampler.
According to the NIOSH National Occupational Exposure Surveys of 1972 and 1982, workers in the following industries (with standard industrial code) are most likely to be exposed to MEK peroxide: boat building and repairing (SIC 3732), cut stone and stone products (SIC 3281), pressed and blown glass (SIC 3229), terrazzo, tile, marble, mosaic (SIC...
13 lis 1992 · Since MEK is a Class I Flammable liquid, the use and storage requirements are found at 29 CFR 1926.152. Our answers to your questions follow. Question 1: When transferring to a smaller container either by pouring or pumping, do the containers need to be grounded to prevent sparks?
24 mar 2023 · NIOSH suggests that employers use Hierarchy of Controls to reduce the risk of injuries. If your industry uses methyl ethyl ketone, you must read the chemical labels and the accompanying Safety Data Sheets for hazard information.
Methyl ethyl ketone (C4H8O or CH3CH3COCH2CH3) is a colorless, flammable liquid with a sharp odor. It can be harmful to the eyes, skin, and if inhaled or swallowed. Workers may be harmed from exposure to methyl ethyl ketone. The level of exposure depends upon the dose, duration, and work being done.
Follow OSHA respirator regulations (29 CFR 1910.134) and use NIOSH/MSHA approved respirators. Protection provided by air purifying respirators against exposure to any hazardous chemical is limited. Use a positive pressure air supplied respi-rator if there is any potential for uncontrolled release, expo-
20 lut 2024 · MEK plays a significant role in the plastics and polymers industry. It’s used in the production of plastic sheets, containers, and other polymer-based products, where it acts as a solvent and a processing aid. Construction. In construction, MEK is found in adhesives, sealants, and coatings.
