Search results
This is how you change to the setting mode for time and date. The seconds flash in the display. Press the push-button (B) briefly. The sec-onds are set to zero. Briefly push the recessed button (D); the minutes flash in the display. Press the push-button (B) to set the min-utes.
Our extraordinary Stauer Titanium Atomic Watch utilizes the transmissions directly from that remarkable cesium fission atomic clock to report the most precise time. This scientifically advanced timepiece will gain or lose only one second over a 20 million-year period.
I. Setting the Time Zone 1. Push the left recessed button (B) for 3-5 seconds or until the digital window changes. The current time zone will be shown on the left and the present hour for the corresponding time zone will be shown on the right. 2. Tap the right push button (A) until desired time zone is reached 3.
TIMESETTING THE MAIN DIAL: 1. Pull the crown (part C) out to position “1.”. Rotate the crown to adjust the watch hands to the desired time selection. Once the time is set, push the crown back into the original “0” position.
Advanced Time Setting Techniques • When setting the hour hand, check that the 24-hour hand is correctly set. • When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact time. SETTING THE DATE 1. Pull the crown (part A) out to position “1” and rotate it counter-clockwise tot he ...
TIME.SETTING SETTING THE TIME Locate the crown on your Stauer watch (see diagram part C) and note the three crown positions (0-1-2). 1. Pull the crown out to position "2" and rotate the crown clockwise until the desired time is set. 2. When finished setting the time, push the crown back to the "O" (zero) posi tion. At this point the small ...
1. To set the time: Locate the crown on your Stauer watch (diagram part A). Please note the two crown positions (0-1) in part A of the diagram. 2. Before the watch is worn for the first time, wind the crown, by hand, 25 to 30 cycles each day by rolling the crown clock-wise (away from you) while in the “0” (zero) position. 3.To set the time ...
