Search results
This is how you change to the setting mode for time and date. The seconds flash in the display. Press the push-button (B) briefly. The sec-onds are set to zero. Briefly push the recessed button (D); the minutes flash in the display. Press the push-button (B) to set the min-utes.
SURVIVAL KIT #31258. The Stauer Survival Box contains: Carabiner watch: The carabiner watch can be used to keep track of time and to clip the Survival Box to your belt or backpack. (SR626SW battery included)
TO SET THE 24-HOUR TIME This allows part E. to indicate either a 24-hour clock or time for a different time zone. 1. Pull the crown (part A) out to position “1” and rotate it to the desired time. 2. Once the correct time is set, push the crown back into “0” (zero) position. 0 1 2 INSTRUCTION MANUAL Visit us at www.stauer.com
I. Setting the Time Zone 1. Push the left recessed button (B) for 3-5 seconds or until the digital window changes. The current time zone will be shown on the left and the present hour for the corresponding time zone will be shown on the right. 2. Tap the right push button (A) until desired time zone is reached 3.
The minute hand (part D) will vibrate to indicate the time-setting mode is activated. Use either button A or B to adjust the hands to the desired time. Press button. to move the hands backward, and button B to move them forward.
TO SET THE TIME 1. Locate the crown on your Stauer watch (part C). Please note the three crown positions (0-1-2) in part C of above diagram. 2. Before the watch is worn for the first time, wind the crown, by hand, 15 to 20 cycles by rolling the crown clockwise (away from you) while in the “0” (zero) position. 3. To set the time: Pull the ...
To set the time: Locate the crown on your Stauer watch (diagram part A). Please note the two crown positions (0-1) in part A of the diagram. Before the watch is worn for the first time, wind the crown, by hand, 25 to 30 cycles each day by rolling the crown clockwise (away from you) while in the “0” (zero) position.
