Search results
3 lip 2012 · COMMERCIALLY MADE ENTREDEUX:  In case you are new to heirloom sewing and goods, entredeux is a ladder like trim whose name in French means “between {entre} two {deux}. Except for some really raggedy domestic-made entredeux, it is made in Switzerland.  Most commonly used between two pieces of lace, lace and fabric or fabric and fabric, it is u...
8 mar 2012 · Make entredeux trim with this heirloom sewing tip using your sewing machine and a wing needle.
20 sie 2010 · Do not cut the entredeux larger to fit your neck edge, if the neck edge is too large. If the neck edge is larger than your correct entredeux measurement, pull up the staystitch thread to ease the neck in to fit the entredeux.
3 cze 2014 · 1. Do not trim the entredeux. Place the entredeux and fabric right sides together, with raw edges even. Photo 1. 2. With the entredeux on top, use a straight stitch (L=2.0) to stitch in the ditch right along the "ladder" of the entredeux (see photo 1). Photo 2. 3. Trim the seam allowance to 1/8 inch.
30 wrz 2013 · 1. Trim waste fabric from one side of entredeux. 2. Gather lace to desired fullness to fit entredeux strip by pulling the uppermost thread in lace header. Pin strip of gathered lace to ironing board or padded surface right side up.
6 sie 2010 · to lay the entredeux such that the edge of the entredeux lies between the two gathering stitches. The red lines on the right in this photo are to show where the bottom gathering stitch is and wear the two new sets of straight stitches are to go.
17 paź 2019 · Using the single Entredeux, trim the batiste edge off one side and attach to a lace side of the Fancy Band. Use simular machine settings. The Length will still be 1 but the Width may be a little narrower at 1.9.
