Yahoo Poland Wyszukiwanie w Internecie

Search results

  1. 20 lip 2010 · Cut 1 piece of entredeux and one piece of fabric the same length. Prep by starching and pressing the fabric and entredeux (using clean iron, and clean board, also use spray starch) How to. W=0. L=2.0. DO NOT trim the entredeux. lay entredeux and fabric right sides together with fabric on the bottom.

  2. 20 sie 2010 · Pin the Entredeux to the Fabric. Be sure to trim the entredeux selvage if necessary to match the seam allowance of your garment. The seam allowance for this sleeve is 1/4". The entredeux did not need to be trimmed. But you must measure each entredeux because the selvages can differ.

  3. 3 lip 2012 · COMMERCIALLY MADE ENTREDEUX:  In case you are new to heirloom sewing and goods, entredeux is a ladder like trim whose name in French means “between {entre} two {deux}. Except for some really raggedy domestic-made entredeux, it is made in Switzerland.  Most commonly used between two pieces of lace, lace and fabric or fabric and fabric, it is u...

  4. — entredeux machine-made trim used between lace and lace, lace and fab- ric or fabric and fabric. Literally means "between two". 2. Thread the gimp cord, through the two front holes on the 5-hole cording foot. As you stitch the thread encases the cords and holes are created down the middle because of the size of the needle. (#1 )

  5. 5 cze 2014 · Trim the seam allowance to 1/8 inch. Roll and whip this seam allowance by zigzagging (L=1.0; W=4.5) so that one needle swing goes into the fabric right along the previous straight stitching, and the other needle swing goes off the edge of the fabric, rolling the seam allowance (photo 2).

  6. 6 wrz 2013 · Gathered lace to entredeux: 1. Trim waste fabric from one side of entredeux. 2. Gather lace to desired fullness to fit entredeux strip by pulling the uppermost thread in lace header. Pin strip of gathered lace to ironing board or padded surface right side up. Adjust gathers evenly. 3. Cut a piece of Tiger Tape the length of gathered lace strip.

  7. 20 lip 2010 · Pull the header threads (usually thicker threads closest to the top) which will make the lace gather distribute the gathers evenly to the same length as the entredeux.

  1. Ludzie szukają również