Search results
Calculate when/where TOC will occur and complete flight plan boxes for ground speed, time, fuel burn, and magnetic heading. Calculate when you will need to begin decent to TPA (TOD).
FORMULAS How to calculate a VDP: Height Above Touchdown (HAT) / Descent Rate = VDP Distance from RWY. Ex: HAT = 600ft and normal rate of descent is 300ft/nm, so 600/300 = 2 nm. VDP is 2 nm before the runway. Add or subtract this 2 nm from the distance from the runway (VDP = Runway threshold + VDP
Now, use the time/distance/speed formula to find out how long it will take to fly 10 miles. In this formula T = time, D = distance, S = speed. The formula for solving time problems is: T = 60 x D / S. The answer is In minutes. You know the speed (use ground speed) and the distance (10 miles).
Prepare, present, and explain a cross-country flight plan assigned by the evaluator including a risk analysis based on real time weather which includes calculating time en route and fuel considering factors such as power settings, operating altitude, wind, fuel reserve requirements, and weight and balance requirements
1 lis 2022 · Below, you’ll find a “filled out” example of a cross-country flight plan, simulating a fictitious flight from Deer Valley, Phoenix, to Prescott. Under each heading in the flight plan, you’ll find a number and a description of what is going on and what you must do to complete your flight plan.
Flight planning is easy on our large collection of Aeronautical Charts, including Sectional Charts, Approach Plates, IFR Enroute Charts, and Helicopter route charts. Weather data is always current, as are Jet Fuel Prices and avgas 100ll prices.
To meet the requirements for the ATP certificate, cross-country time is more than 50 nm straight-line distance from the original point of departure with no requirement for a landing. 14 CFR 61.1(b)(3)(vi)
